Rubber High-pressure Valve, 100 piece
• packaging unit: 100 piece
For increased tire air pressure.
Rubber valve for transporters and mobile homes filled with a tire pressure of more than 4.5 bar. The valves have a vulcanised support tube made of brass, which extends into the rubber foot (maximum material thickness of the rim 4 mm). This special design allows the tire to be filled with an air pressure of up to 5.5 bar. The valve is an alternative when a metal valve can not be used for technical, constructional or other reasons.
The precondition for the use of such valves is a standard-compliant rim hole and a plane bearing surface on the inner side of the rim for the valve foot so that a secure seal is possible.
• Valve hole (mm): 11.3 + 0.4
• Pressure range: <7.0 bar
• Rim thickness: 1.8 - 4
• Max. bending angle: 25 °
• Length (mm): 43.5
• Type: Snap-in
• Valve hole(mm): 11.3 + 0.4
• Rim thickness (mm): 1,8 - 4
• Pressure range (bar): <7.0 bar
• Packing unit: 100 pcs.
For increased tire air pressure.
Rubber valve for transporters and mobile homes filled with a tire pressure of more than 4.5 bar. The valves have a vulcanised support tube made of brass, which extends into the rubber foot (maximum material thickness of the rim 4 mm). This special design allows the tire to be filled with an air pressure of up to 5.5 bar. The valve is an alternative when a metal valve can not be used for technical, constructional or other reasons.
The precondition for the use of such valves is a standard-compliant rim hole and a plane bearing surface on the inner side of the rim for the valve foot so that a secure seal is possible.
• Valve hole (mm): 11.3 + 0.4
• Pressure range: <7.0 bar
• Rim thickness: 1.8 - 4
• Max. bending angle: 25 °
• Length (mm): 43.5
• Type: Snap-in
• Valve hole(mm): 11.3 + 0.4
• Rim thickness (mm): 1,8 - 4
• Pressure range (bar): <7.0 bar
• Packing unit: 100 pcs.